> For the complete documentation index, see [llms.txt](https://brenkel-solutions-eg.gitbook.io/dp-planning-eng/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://brenkel-solutions-eg.gitbook.io/dp-planning-eng/installation/demandplus+-setup.md).

# demandPlus+ Setup

## Fields

### C

<details>

<summary>Calculate Inventory Cost for one Period Line</summary>

If this field is unchecked, then for all period lines an inventory cost calculation will be done and inventory cost lines created. If this field is checked, then only the final period line will have an inventory cost calculation.

</details>

### D

<details>

<summary>Disable Planning Transparency</summary>

Disables planning transparency functionality.

</details>

### F

<details>

<summary>Fill New Planning Calibration Values</summary>

Transfers the calculated values automatically to the new values in the planning calibration.

</details>

### I

<details>

<summary>Issued Planning Calibration Nos.</summary>

Specifies the code of the number series used to assign numbers for issued planning calibrations. Will be automatically created when the extension is installed.

</details>

### M

<details>

<summary>Maximum Inventory Surcharge %</summary>

Percentage surcharge on the Reorder Point for calculating Maximum Inventory.

</details>

<details>

<summary>Maximum Iteration Inventory Cost</summary>

When the planning calibration is calculated inventory cost lines are created based on step range of the item. If the step range of the item is very small compared to large numbers of Quantities a long runtime can occour. This setting is used to prevent this from happening.

</details>

### O

<details>

<summary>Ordering Costs</summary>

Absolute cost of creating a single order. This value is used to calculate the optimal Reorder Quantity.

</details>

### P

<details>

<summary>Plan Calib. Shortcut Field ID</summary>

Specifies the Field ID for Plan. Calib shortcut.

</details>

<details>

<summary>Plan. Calib. Shortcut Fieldcapion</summary>

Specifies the field caption for Plan. Calib shortcut.

</details>

<details>

<summary>Plan Calib. Shortcut Table ID</summary>

Specifies the Table ID for Plan. Calib shortcuts. For more information about the Plan. Calib. Shortcuts see:: [Shortcut Fields](/dp-planning-eng/planning-calibration/shortcut-fields.md)

</details>

<details>

<summary>Plan. Calib. Shortcut Tablecaption</summary>

Specifies the table caption for Plan. Calib shortcut.

</details>

<details>

<summary>Planning Calibration Nos.</summary>

Specifies the code of the number series used to assign numbers for planning calibrations. Will be automatically created when the extension is installed.

</details>

<details>

<summary>Planning Template Nos.</summary>

Specifies the code of the number series used to assign numbers for planning templates. Will be automatically created when the extension is installed.

</details>

### R

<details>

<summary>Reorder Point Surcharge %</summary>

Specifies a percentage surcharge which will be added to the calculated reorder point.

</details>

### S

<details>

<summary>Stock Keeping Expense Ratio %</summary>

Percentage costs for the storage of items. This value is used to calculate the optimal Reorder Quantity.

</details>

### U

<details>

<summary>Update Zero Qty. in Masterdata</summary>

If selected, zero values will be transfered to master data when issuing a planning calibration. If deselected, zero values will be ignored.

</details>

## Change Plan. Calib. Shortcuts

![Figure 1: Plan. Calib Shortcuts](/files/EDZbHFaZ9CC6HHyOtCxj)

For more information about the Plan. Calib. Shortcuts see: [Shortcut Fields](/dp-planning-eng/planning-calibration/shortcut-fields.md)

## Detailed Ordering Costs

![Figure 2: Detailed Ordering Costs](/files/Q6swad3VJfovJGdJTqrk)

For more information on the detailed ordering cost see: [Detailed Ordering Costs](/dp-planning-eng/planning-calibration/planning-calibration/inventory-costs.md)

## Bitmap Setup

![Figure 3: Bitmap Setup](/files/W1jibgsp01slj4s2UTLe)

For more information about the bitmap setup see: [Assisted Setup](/dp-planning-eng/installation/assisted-setup.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://brenkel-solutions-eg.gitbook.io/dp-planning-eng/installation/demandplus+-setup.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.